Polishing machine working principle and use
Polishing machine is divided into capsule polishing machine and pill polishing machine, but their working principle is inseparable from the principle of polishing machine work. Here we briefly present the working principle of polishing machine and use. Wednesday, September 21, 2016
Polishing machine is divided into capsule polishing machine and pill polishing machine, but their working principle is inseparable from the principle of polishing machine work. Here we briefly present the working principle of polishing machine and use.
- The rotating movement of the brush drives the capsule along the wall of the polishing tube to make a circular spiral movement, so that the capsule is moved forward by the coil spring, and the capsule shell is polished and rubbed with the brush and polished tube wall. The discharge port into the waste.
In the waste, due to the role of negative pressure, the role of the capsule in the air, the weight of the capsule failed to rise, through the straw into the vacuum cleaner, the weight of qualified capsules continue to fall through the activities of the hopper discharge, effectively polished To the purpose of waste. During the polishing process, powder and small debris scraped off are inserted into the sealing cylinder through the small holes in the wall of the polishing barrel and then sucked into the vacuum cleaner for recycling.
- In the bottom of the polishing tube, connected to a special industrial vacuum cleaner in a straw; to the top of the waste, connected to a distinct industrial vacuum cleaner another straw.
- Turn on the industrial vacuum cleaner and polishing machine power, and adjust the polishing machine speed. With a small amount of waste shell capsule test machine, adjust the negative pressure into the air volume of the waste, so that just be able to remove the shell broken capsule is appropriate. Such as negative pressure into the wind too much, it is possible to suck a good capsule, too small cannot play to the role of waste.
- polishing machine speed adjustment: the electronic governor finishing. For fragile capsules, the speed may be appropriate low, on the contrary may be apt to increase. tablet polishing speed can be appropriately reduced.
- Polishing tube tilt adjustment: Tilt adjustment by the tail plate, the slope of a large polishing effect, the slope of small production efficiency.
- adjustment of industrial vacuum cleaners: professional industrial vacuum cleaners has two sets of dust control device, each suction air conditioning plate adjustment, the amount of air flow according to the use of regulation.